2017年1月9日星期一

PVD Magnetron vacuum Sputtering Deposition Line for ITO Glass

PVD Magnetron vacuum Sputtering Deposition Line for ITO Glass
Leading-Coating vacuum coating equipments is a professional company in all kinds of coating machines which has 30 years experience in field.
The pvd magnetron sputtering coating machine is a vacuum deposition machine line uses two industrial computers and PLC systems. The production line can dynamically display and control the whole operation process with alarm and self-protective functions. The important processing parameters with several optical inspected systems connected to the computer, so the color and thickness of the film can be automatically controlled.
ITO Glass coating line:
This machine are available to metalize transparent electric conductive film on glass, for example, LCD, PDP display or OLED display, etc.
Using vacuum magnetron sputtering deposition technology, with dual cathodes, MF sputtering technology and international advanced control system, it is to deposit SiO2/ITO on the float glass. All the process is automatically controlled in series.

2016年12月29日星期四

Vacuum coating machine metal decorative film PVD coating system technology

Vacuum coating machine metal decorative film PVD coating system technology
PVD vacuum coating machine metal decorative film coating system technology, mainly in decorative product design. Such as large sheets, pipe, protective film coating on upholstery, vacuum coating equipment after coating products to show elegant, dazzling and other kinds of beautiful effects, and the film does not fade and wear resistance.
1. trim materials (substrates)
...
(1) metal. Stainless steel, steel alloy, zinc-based alloys.
(2) glass, ceramics.
(3) plastic. ABS, PVC, PC, SHEET, nylon, crystal and so on.
(4) of a flexible material. Polyester film, PC, paper, cloth, foam, strips etc.
2. The types of decorative film
(1) a metal substrate decorative film layer: TiN, ZrN, TiC, CrNx, TiCN, CrCN, Ti02, Al and the like.
(2) glass, ceramic decorative coating: TiO2, Cr2O3, MgF2, ZnS and so on.
(3) decorative plastic substrate film: AI, Cu, Ni, Si02, Ti02, ITO, MgF2.
(4) decorative film flexible materials: Al, lTO, Ti02, ZnS, etc.
Vacuum coating machine plating bright chrome plated brass sanitary ware by magnetron sputter ion plating system ZrN film. Vacuum coating equipment using the base for zirconium unbalanced magnetron sputtering target and frequency power supply, power supply and pulse bias.
(1) vacuum
5 X 10-3 ~ 6.6 x 10-13Pa background vacuum. Vacuum coating equipment heating temperature should be in the vacuum chamber wall and then back up to deflate 100 ~ 150 ℃.
(2) Cleaning bombardment
Vacuum: Walter argon maintained at a vacuum of 2 ~ 3Pa. Bombardment voltage: 800 ~ 1000V, pulse duty cycle of 20%. Bombardment time: 10min.
(3) Coating
① zirconium layer deposition
Vacuum: purged with argon, the vacuum was maintained at sx l0-1Pa. Target Voltage: 400-550V, target power 15 N 30W / Crrr2. Pulsed Bias: 450 ~ 500V, 20% duty cycle. Coating time: 5 ~ 10min.
② plated ZrN films
Vacuum: nitrogen gas, the degree of vacuum is maintained at (3 ~ 5) x 10-1Pa. Target Voltage: 400 ~ 550V, target current increases with the increase of the target area. Pulsed Bias: 150 ~ 200V, 80% duty cycle. Coating time: 20 ~ 30min.
Because of the vacuum magnetron sputtering coating machine metal ionization rate, not easy reactive deposition, a relatively narrow range of technology to obtain a compound film. Vacuum coating equipment can be gas, the reaction gas from the ion source, expanding the range of reactive deposition process. The plasma arc can also be used as a source to produce columnar arc ionization source, columnar arc source or assisted deposition sources.
our company committed to the development and production of vacuum coating machines, vacuum coating equipment widely used in automotive, glass, plastics, electronics, watches, metal industries, products are widely sold worldwide, to provide customers with customized process solutions programs and machines,

2016年12月26日星期一

Introduction and vacuum coating materials for evaporation source requirements

Introduction and vacuum coating materials for evaporation source requirements
A vacuum coating technique to produce a thin film material. In atomic vacuum chamber material is isolated from the heating source to hit the surface of the object to be plated. The technology used in the production of aluminum coated CD (compact disc) and by a mask on a printed circuit board metallized film.
Evaporation source in vacuum coating material requirements?
Evaporation source should typically be considered material and shape of the evaporation source, the evaporation source material for general requirements are:
(1) a high melting point. Because the evaporation temperature of the evaporation material (equilibrium vapor pressure for the temperature 1.3Pa) Most between 1000 ~ 2000 ℃, therefore, the melting point of the evaporation source material should be higher than this temperature.
(2) equilibrium vapor pressure. This is mainly to prevent or reduce the evaporation source material at a high temperature with an evaporation material is evaporated into the impurity into the deposited film layer. Only in equilibrium pressure of the evaporation source material is sufficiently low, in order to ensure self-evaporation has the smallest amount of evaporation, so as not to affect the vacuum system and contamination layer, the evaporation source materials in order to make a very small quantity of evaporated, and evaporated in selection temperature, while the evaporation source material, should be lower than the evaporation temperature of the material in the evaporation source material for the preparation of equilibrium pressure of 1.3 × 10-6Pa when high quality film can be used with the corresponding temperature are 1.3 × 10-3Pa.
(3) Stable chemical properties and should not chemically react with the evaporation material at high temperatures. At high temperatures may produce between some evaporation source material, and evaporation of the reaction and diffusion material to form compounds and alloys. In particular, the formation of a eutectic alloy evaporation source easily blown. For example, when a high temperature tantalum and gold may form an alloy, aluminum, iron, nickel, cobalt and also tungsten, molybdenum, tantalum alloy evaporation source material. Tungsten can also react with water or oxygen to form volatile oxides such as WO, WO2 or WO3; molybdenum can react with water or oxygen to form volatile MoO3 and the like. Therefore, the material should be selected with the coating material does not react or form an alloy made of the material of the evaporation source material

2016年12月19日星期一

The advantages of sputtering coating film

The advantages of sputtering coating film
Sputtering vacuum coating method, because of its different coating methods, the effect of the same film coating material prepared will be different, although the naked eye can not see it, but it does have certain advantages.
Film thickness, good stability, due to the sputtering target film thickness and discharge currents have a great relationship, the higher the current, the greater the sputtering eff...iciency, within the same time, the thickness of the coating layer is relatively big, as long as the current value of a good control, you need more than a thick plating, or more thin layers can be, of course, this thickness is within the allowable range, and control the current, regardless of how many times repeated plating, the film thickness is not will change the thickness of the film thickness can be attributed to the stability of good controllability and repeatability.
Film with strong, during the sputtering process, some electrons strike the substrate surface, and activating the surface atoms, and produce clean effect, the energy energy-plated material obtained by sputtering evaporation obtained higher than 1 when the two orders of magnitude, such a plating material having a high atomic impact energy to the substrate surface, more energy can be transferred to a substrate, produce more heat, so that the activation of atoms by electrons accelerated motion, and the part plated metal atom earlier fused together with each other, other plating material atom tight with successively deposited film, strengthening the binding force of the film and the substrate.
A wide range of plating material, due to sputtering by argon ion bombardment makes high speed plating material sputtered out, unlike Evaporation and restrictions due to the melting point of only using a relatively low melting point metal plating, sputtering and almost all the solid material can become coated material.
You can see from the above points Sputtering is indeed better than the evaporation vacuum coating effect, a different principle determines the thickness of the film is more stable sputtering, combined with stronger, broader-plated material.

2016年12月14日星期三

Heating coating vacuum coating machine equipment

Heating coating vacuum coating machine equipment
The emergence of vacuum technology now makes a lot of products to be able to get rapid development, take our most common foods, for instance, use the vacuum technology, makes it to extend the shelf life, the main performance that is used to the food. When it comes to the use of vacuum technology, vacuum coating machine equipment used in vacuum is one of the more prominent a technology, when it come...s to this kind of vacuum coating, now is the use of surface treatment to the items in the typical of a technology. The vacuum coating machine equipment is through relatively vacuum environment, using the material of the object surface coating, this coating method will not influenced by outside factors, is to provide assistance for the surface coating, which is now one of the strengths of the vacuum coating machine.
Now more coating equipment is mainly used in the form of heat is given priority to, after the use of heating evaporation of groups of atoms or ions attached to the substrate, forming, removed substrate, makes the membrane layer covered on the goods, wait for after cooling is formed on the surface of coating, the vacuum coating is used to more in the way of coating metal materials.

2016年12月13日星期二

Vacuum coating technology has huge potential

Vacuum coating technology has huge potential
Vacuum coating technology is a kind of novel material synthesis and processing of new technologies, is an important part in the field of surface engineering technology. Vacuum coating technology is the use of physical and chemical methods to solid surface coated with a layer of special properties of the coating, so that the solid surface wear resistance, high temperature resistance, corrosion resistance, oxidation resistance, radiation, conduction, vacuum evaporation coating machine permeability, insulation and decoration and so on many superior performance is better than that of the solid material itself, to improve product quality, extend the life of products, saving energy and the role of the significant technical and economic benefit. Therefore vacuum coating technology is known as one of the most promising key technology, and has set up a high technology industrialization development in loose attractive market prospect. The emerging of vacuum coating technology has been applied in various fields of national economy, such as aviation, aerospace, electronics, information, machinery, petroleum, chemical industry, light coating machine, environmental protection, military and other fields.
Often said that uv vacuum plating is including two engineering, vacuum coating and uv spraying processing purpose is, the manufacture of plastic finished product looks more like the effect of metal. About working process of this process is: first of all the products in a coat, so, more opportunities of arc ion plating surface and cover up the deficiencies in the product, also can increase the adhesion of metal film and products.
Subsequent vacuum coating, according to the different products and different requirements of customers to choose a different metal evaporation, so as to realize the product on the surface of the metal effect. The photovoltaic glass coating machine for uv coating, in order to protect the metal film, also in order to make the products meet the requirements of some necessary testing. Some customers will ask process in the middle of the coating before and after spraying to join and adds color to achieve complete and achieve the purpose of more cosmetic requirements, also can adjust product surface gloss, the surface of the product from the mirror effect to inferior smooth effect.

2016年12月8日星期四

Why do vacuum coating machine regular cleaning?

Why do vacuum coating machine regular cleaning?
Vacuum coating machine used for periodic cleaning of the after time is long, a lot of people will ask why? It is not often clean can appear what problem? Let's analyze.
Used in vacuum coating machine prior to coating, coating materials for coating materials to do simple surface clean can prolong the service life of coating machine, because of various pollutants not only cannot obtain the required degree of vacuum, vacuum system can also affect the joint strength and sealing performance of vacuum components.
Common pollutant of vacuum coating machine are:
1. The oil include the processing, assembling and operating with the lubricant, cutting fluid, vacuum oil, etc.;
2. The operation time of hand sweat, blowing time of water vapor and saliva, etc. Acid, alkali, salt substance when cleaning the residual, hand sweat, mineral water, etc.; And polishing residue and environmental dust in the air and other organisms.
Cleaning is the purpose of these contaminants in order to improve the vacuum coating machine work stability, can make the job more smoothly.

2016年12月7日星期三

Analysis of the advantages of PVD vacuum coating technology

Analysis of the advantages of PVD vacuum coating technology
Vacuum coating technology advantage in where? Vacuum coating technology of the most widely used in plastic products, vacuum coating factory said the plastic is easy molding, low cost, light weight, no corrosion and other characteristics, widely used plastic products, but because of its disadvantages restricted the expanded application. Through the application of vacuum coating technology, plastic surface metallization, combine organic materials and inorganic materials, greatly improved its physical and chemical properties. Vacuum coating technology advantage is mainly embodied in the following aspects:
1, make plastic surface conductivity;
2, easy to clean, no dust.
3, improve beautiful, smooth surface, the metallic color, adornment sex is greatly improved;
4, reduce water absorption, the larger the number of coating, the less pinhole, bibulous rate is lower, the product is not easy to deformation, improve the heat resistance;
5, improve surface hardness, the original plastic surface than metal soft and vulnerable, through vacuum coating technology, hardness and wear resistance increase greatly;
6, can improve the weatherability, general plastic outside can aging fast, the main reason is caused by ultraviolet irradiation, and after plating aluminum, aluminum with ultraviolet the strongest reflection, so the weather is greatly increased.

2016年11月30日星期三

The principle of vacuum coating vendors would explain PVD coating technology

The principle of vacuum coating vendors would explain PVD coating technology
PVD (physical vapor deposition) coating technology is mainly divided into three categories, vacuum evaporation coating, vacuum sputtering plating and vacuum ion plating. Corresponding to the three categories of PVD technology, the corresponding also have vacuum evaporation coating machine for vacuum coating equipment, vacuum sputtering coating machine and vacuum ion coating machine of the three. For nearly 10 years, the development of the vacuum ion plating technology is the fastest, it has become one of today's most advanced surface treatment method. We usually say of PVD coating, is refers to the vacuum ion plating; Commonly referred to as PVD coating machine, namely vacuum ion coating machine.
1, PVD coating membrane layer thickness - PVD coating layer thickness of micron grade, thickness of the thinner, the average of 0.3 mu m ~ 5 microns, the decorative coating membrane layer thickness is commonly 0.3 mu m ~ 1 mu m, so it can be almost does not affect the original size of the workpiece raise all kinds of physical properties and chemical properties on the surface of the workpiece, need not again after plating processing.
2, PVD coating can plating film color kinds of PVD coating is able to make the color of the film has a deep golden yellow, pale yellow, brown, tan, gray, black, colored, seven color, etc. By controlling the deposition in the process of relevant parameters, can control the plating color; Coating can be used after the relevant instruments to measure color, to quantify the color, to make sure the plating color whether meet the requirements.
3, PVD coating with the traditional chemical plating electroplating (water) the similarities and differences of PVD coating with the traditional chemical plating is the same, both belongs to the category of the surface treatment, and through certain way makes a material covered on the surface of another material. The difference is: PVD coating film layer and the adhesion strength of the workpiece surface is bigger, membrane layer's hardness is higher, better wear resistance and corrosion resistance, the performance of the film is more stable; PVD coating does not produce toxic or contaminated material.
4. PVD coating technology at present the main application of the industry, the application of PVD coating technology are divided into two categories: decorative coating and coated tools. The purpose of decorative plating is aimed to improve the appearance of the artifact decoration properties and color at the same time make more wear-resisting corrosion resistance to prolong the service life of the workpiece; The main application hardware industry fields, such as doors and Windows hardware, locks, bathroom hardware, etc. Tool for the purpose of the plating is mainly in order to improve the surface hardness and wear resistance, reduce the friction coefficient of surface, improve the service life of the workpiece; This is mainly used in all kinds of knife cut, turning tools, such as turning tool, cutter, milling cutter, drill, etc.), all kinds of hardware tools (such as screwdrivers, pliers, etc.), various kinds of mold and other products. :
5. The main characteristic of PVD coating, ion plating technology and advantages - compared with vacuum evaporation coating vacuum sputtering coating, PVD ion coating has the following advantages:
1. The film layer and binding force on the surface of the workpiece is strong, more durable and wear-resisting
2. Ion diffraction performance is good, can plating complex shape workpiece 0 v + R0 S4
3. The film deposition rate is fast, high efficiency 4. To the coating layer type 5. A comprehensive membrane layer, stable performance, high safety (obtained FDA certification, can be implanted in the body)

2016年11月27日星期日

The principle of PVD coating technology

The principle of PVD coating technology
PVD is English Physical Vapor Deposition, in Chinese means "Physical Vapor Deposition", is refers to under the condition of vacuum, use Physical method to make material preparation technology of thin film deposited on the plated workpiece.
2. The PVD coating and PVD coating machine:
PVD (physical vapor deposition) coating technology is mainly divided into three categories, vacuum evaporation coating, vacuum... sputtering plating and vacuum ion plating. Corresponding to the three categories of PVD technology, the corresponding also have vacuum evaporation coating machine for vacuum coating equipment, vacuum sputtering coating machine and vacuum ion coating machine of the three. For nearly 10 years, the development of the vacuum ion plating technology is the fastest, it has become one of today's most advanced surface treatment method. We usually say of PVD coating, is refers to the vacuum ion plating; Commonly referred to as PVD coating machine, namely vacuum ion coating machine.
3. PVD coating, ion plating technology, its particular principle is under the condition of vacuum, with low voltage, high current arc discharge technology, by use of gas discharge from target material evaporation and evaporation occurs matter and gas ionization, using electric field acceleration, cause the evaporation material and the reaction product deposition on the workpiece.
4. The characteristics of PVD coating membrane layer, use the PVD coating technology of plating layer, high hardness, high wear resistance, low coefficient of friction), good corrosion resistance and chemical stability, etc, membrane layer of longer life; Membrane layer can greatly improve the appearance of artifacts decorative performance.

2016年11月22日星期二

Film, thin film coating on the vacuum introduction

Film, thin film coating on the vacuum introduction
Film: the film can be considered a two-dimensional material. In the strict academic sense, that only aggregate thickness is less than the thickness of the material characteristics of a real film, otherwise it is generally thin material. Characterized thickness: is the nature of the use of certain basic materials phenomenon will occur abnormal changes in the case of thin material thickness aggregation determined, i.e., when selected for a physical or mechanical properties different from the reference beginning to show it typically has a thickness characteristics when, is characterized in substance to the film thickness.
The main properties of the film:
Thickness: The more uniform the better, should generally be controlled within a range, such as 5, which is about the size of the workpiece coating system
Film surface morphology: transmission electron microscope by scanning electron microscopy (SEM) (TEM) analysis showed the like particle state, the availability of dense film surface, defect status, the annealing treatment on the membrane surface and other information.
Membrane organization features: X-ray diffraction analysis of the composition of the film, and other information available to the purity of the film. Film stress: the smaller the better films of internal stress, the internal pressure of the annealing process can maximize the release of the film.
Characteristics of the film and the substrate contact: mainly refers to the adhesion between the film and the substrate, of course, the stronger the better adhesion, the film appears to avoid missing the open and so on.
Dense membrane: mainly refers to film hardness and abrasion resistance, to avoid the open circuit external scratches caused.
Chemistry membrane, thermal stability: the requirements for the metal film layer of the metal film layer prepared resistivity as low as possible, close to the bulk resistivity.
Film analysis commonly used methods:
Scanning electron microscopy SEM analyzes 10nm resolution is generally more than surface information, sample preparation simple.
Transmission electron microscopy TEM analyzes structural information, resolution of less than 1 atom, sample preparation difficult.
XRD analysis of the structure is the information, but can not analyze micro-structure information for the film, XRD given direction, SEM choose a good area, TEM-depth analysis, which is a combination of boxing.

2016年11月20日星期日

The future development of coating industry must be vacuum coating

The future development of coating industry must be vacuum coating
there are two main types of professional coating methods,one is chemical deposition (CVD), one is physical climate accumulation, also called vacuum deposition (PVD).
Chemical coating is rich in a membrane element of gaseous reaction agent or liquid reaction required for other gas introducing echo chamber, in the process of chemical reaction to generate film substrate appearance at...tack. In the process of chemical film, simple solution pollution, if the coating appearance more impurities, owe better plating.
Chemical coating demand response temperature is very high, usually to control at 1000 ℃ or more, but many matrix data cannot be influenced by the high temperature, timely and cemented carbide, although can endured high temperature, because of the high temperature in chemical coating manufacturing environment will also constitute a coarse grains,which cause the brittle phase, function deterioration. If on the carbide TiN plating, diffusion of carbon will attack response and solution decarburized layer, the layer patience is poor, low flexural strength, constitute a taking shorten tool use.
Vacuum coating machine dispose of chemical coating attack in a series of questions excellently. Vacuum coating is under the condition of vacuum, choose low voltage, high current arc discharge skills, using gas discharge ability, use other discharge is the transpiration and restore the transpiration of target material and gas ionization, all using the accelerating effect of electric field, the accumulation and reaction products made by transpiration material on the workpiece.
All coating materials are in a vacuum environment after plasma accumulation in the appearance of workpiece, the disposal of the chemical plating solution of pollution question, not toxic or pollutants, plating film hardness higher, good wear resistance and corrosion resistance, more safe. Disposal of vacuum coating technology can control the temperature below 150 ℃ ~ 500 ℃, suitable for a variety of substrate materials, preparation of colorful coating, plating system of carbide cutting tools can make its full progress 2 ~ 10 times.

2016年11月16日星期三

PVD coating technology major application industries

PVD coating technology major application industries
Applications PVD coating technology is mainly divided into two categories: decorative plating and plating tool.
Decorative plating main purpose is to improve the performance and appearance of the decorative color of the workpiece while the workpiece is more wear resistant prolong its service life; this area is mainly applied in various areas of the hardware industry, such as door and window hardware, locks, bathroom hardware and other industries.
Tools plated main purpose is to improve the surface hardness and wear resistance of the workpiece, reducing the friction coefficient of the surface, and improve the life of the workpiece; this area is mainly used in a variety of knives, scissors, cutting tools (such as turning, planing, milling , drills, etc.) and other products.

2016年11月13日星期日

Film, thin film coating on the vacuum introduction

Film, thin film coating on the vacuum introduction
Film: the film can be considered a two-dimensional material. In the strict academic sense, that only aggregate thickness is less than the thickness of the material characteristics of a real film, otherwise it is generally thin material. Characterized thickness: is the nature of the use of certain basic materials phenomenon will occur abnormal changes in the case of thin material thickness aggregation determined, i.e., when selected for a physical or mechanical properties different from the reference beginning to show it typically has a thickness characteristics when, is characterized in substance to the film thickness.

The main properties of the film:

Thickness: The more uniform the better, should generally be controlled within a range, such as 5, which is about the size of the workpiece coating system

Film surface morphology: transmission electron microscope by scanning electron microscopy (SEM) (TEM) analysis showed the like particle state, the availability of dense film surface, defect status, the annealing treatment on the membrane surface and other information.

Membrane organization features: X-ray diffraction analysis of the composition of the film, and other information available to the purity of the film. Film stress: the smaller the better films of internal stress, the internal pressure of the annealing process can maximize the release of the film.

Characteristics of the film and the substrate contact: mainly refers to the adhesion between the film and the substrate, of course, the stronger the better adhesion, the film appears to avoid missing the open and so on.

Dense membrane: mainly refers to film hardness and abrasion resistance, to avoid the open circuit external scratches caused.

Chemistry membrane, thermal stability: the requirements for the metal film layer of the metal film layer prepared resistivity as low as possible, close to the bulk resistivity.

Film analysis commonly used methods:

Scanning electron microscopy SEM analyzes 10nm resolution is generally more than surface information, sample preparation simple.

Transmission electron microscopy TEM analyzes structural information, resolution of less than 1 atom, sample preparation difficult.

XRD analysis of the structure is the information, but can not analyze micro-structure information for the film, XRD given direction, SEM choose a good area, TEM-depth analysis, which is a combination of boxing.

2016年11月10日星期四

The working principle of the multi arc ion coating machine

The working principle of the multi arc ion coating machine
Multi arc ion coating machine is a kind of efficient and harmless, non-polluting ion coating equipment, has the deposition speed, high ionization rate, large ion energy, equipment, the advantages of simple operation, low cost, large quantity.
The principle of vacuum arc ion was cold cathode self sustaining arc discharge pulse technology and magnetic control technology control sputtering coating machine, the sedimentary particle refinement, membrane layer to improve the performances. It can not only in a coating and metal products surface coating on the surface of non-metallic products products, and can be plated metal film, titanium nitride, titanium carbide, nitride zirconium, chromium nitride and chemical compounds such as titanium, nickel, chromium, copper, film, multilayer superhard film, mixed gold film of titanium nitride and alloy membrane, and can in a very short period of time, complete machining process is a kind of multi-functional high coating equipment. Are widely used in the superhard coated tools, moulds, automobile wheel hub, ceramic, golf, tabulation, hotel supplies, sanitary ware, lamps and lanterns, glasses frame, metal products, decorative coating, etc.

2016年11月6日星期日

Coating principle is what?

Coating principle is what?

At present there are three kinds of commonly used PVD: vacuum evaporation, sputtering deposition and ion plating. They work as follows: really empty plating film is in 1.33 x10 ^ 3 and 1.33 x10 ^ - 4 under the pressure of pa, with heat source heating material such as electron beam evaporation, evaporation of atoms or molecules directly on the workpiece surface sediments. Sputtering coating: it is not the evaporation technology of physical vapor deposition method. When plating, the studio into a vacuum, into argon as working gas, and maintain its pressure is 0.13 to 1.33 Pa. Ion plating: is it under the condition of vacuum, the use of gas discharge so that gas or evaporation material ionization of evaporation in the gas ion or material under the action of ion bombardment, evaporation, material or other reactant vapor deposition on the workpiece.
Vacuum coating is mainly refers to a kind of need to be done under high vacuum coating, including many types, including vacuum ion evaporation, magnetron sputtering, MBE molecular beam epitaxy, laser sputtering deposition and so on many kinds of PLD. The main idea is divided into evaporation and sputtering.
Need coating known as substrate, the plating material is become a target. Substrate with target in the vacuum chamber.
Evaporation coating is to heat the surface of target component to groups of atoms, or ions form by evaporation, and sedimentation in the substrate surface, through the film-forming process (scatter - island structure - the vagus structure - layered growth) form the membrane. For sputtering coating, can be simple to understand for the use of electronic or high-energy laser bombardment of target, and the surface components form groups of atoms, or ions was sputtering, and eventually deposited on the substrate surface, experience the film-forming process, eventually form a thin film.

2016年11月2日星期三

Vacuum coating machine color stainless steel ambry coating?

Vacuum coating machine color stainless steel ambry coating?
Colour stainless steel has become a beautiful beautiful in stainless steel series of a bunch of; Professional production of colored stainless steel vacuum DuMoTai gold plate, the color is complete, can be plated gold, champagne gold, black gold, gun black, white, silver, bronze, bronze, rose gold, purple, golden, coffee, golden gem blue, seven color, dark brown, and so on, the titanium material for stainless steel 201202304, etc; On the surface of 8 k, 2 b, BA, wire drawing, No. 3, No. 4. Stainless steel plate, BA board, 8 k mirror plate, titanium plate, grinding plate, etching flower plate, embossed plate, color is rich and varied, colour and lustre is stable, uniform film, strong wear resistance. Ensures decades do not fade, which greatly strengthened the kitchen stainless steel colour profusion and diversity, revitalize your gold match the kitchen the permanent charm and women sweet gentle and comfortable. Vacuum coating machine equipment
Color stainless steel composite plate send polishing lines, coating, etching, sandblasting and other process focused on the same floor are combined process. Then plating color.

2016年10月31日星期一

Vertical splash control sputtering coating machine equipment?

Vertical splash control sputtering coating machine equipment?
Vertical splash control sputtering coating machine characteristics of the equipment
The vacuum coating machine coating chamber, valves and piping are made of stainless steel vertical, the structure of the single door;
1, fast deposition rate, temperature rise is small, can restrain the lighter and better target poisoning phenomenon;
2, vertical single door sputtering coating machine release of high energy density and the membrane layer adhesion has significantly increased;
3 + PLC, touch screen, which can realize full automatic control, automatic/manual switch at any time.
4, coating chamber volume is large, large loading capacity, high production efficiency.
5, vacuum evaporation coating mechanic structure frame adopts revolution, can set up automatic positive &negative, product uniformity good.
6, the machine configuration is reasonable, the extraction rate is fast, low noise, low consumption.
7, can according to customer requirements to go more than the target source, double door coating machine

2016年10月26日星期三

Vacuum coating machine cathodic arc technology?

Vacuum coating machine cathodic arc technology?
Vacuum coating machine cathode arc technology using the vacuum arc discharge, the solid cathode evaporation, target material in the reinforcement, and through the plasma to fly to the anode substrate surface deposition film. Cathode arc is a typical high current (up to several hundred amperes) arc, arc to transmit the cathode material, in the form of plasma and ion current accounts for about 10% of the arc current. Because of this, the cathode arc technology has a very high deposition rate. Be away from the target material particles in the 60 to 100 ev average energy form high arousal of ion beam sputter out, in inert gas or vacuum deposition reaction gas on the surface of the matrix, has high energy ion beam to increase the film adhesion and disrupt the membrane structure of the columnar crystal is very beneficial, and thus can significantly improve the organizational structure and mechanical properties of the membrane. However, because of the cathode arc evaporation process is very fierce, and the sputtering process is relatively peaceful compared to the magnetron sputtering, cathode arc evaporation process will produce more harmful particles, this limits the cathode arc technology applied in need high quality surface.
At present, the thin film device manufacturers through the study of film forming principle and technology adopted various measures to reduce "droplets" : adopt unique arc source to meet the needs of industrial production and obtained a certain result, such as Aksenov and collaborators 90 ° bend type magnetic filter design; By controlling the reaction gas pressure change and with a pulse discharge limits the service life of the cathode spots, can be easily prepared at present widely used TiN, CrN, TiCN, CrTiAlN and DLC hard membrane. Swiss Balzers company is one of the world's largest tool membrane preparation company, is famous for its hot arc technology, it will be the basis of using original thermal arc technology magnetron sputtering and arc technology combined development BAI1200, RCS PVD equipment such as the cathode arc technology is given priority to, can also be additional source of magnetron sputtering deposition WC/C membrane.
BAI1200, RCS USES circular planar cathode source technology and radiation heating technology, can be quickly coating production. Balzers in 08 development BALINIT ARCTIC process, under the deposition temperature of 200 ℃ can be prepared at present three known high-performance nitrogen TiN coating, CrN and TiAlN. Using the technology of preparation of TiAlN can enhance the stability of machining tool cutting edge, its excellent heat resistance and chemical resistance to improve the performance of the high stress components, and have made it possible to dry cutting, high hardness of the coating has the excellent abrasion resistance and corrosion resistance.

2016年10月24日星期一

Domestic vacuum coating machine technology development?

Domestic vacuum coating machine technology development?

Domestic vacuum coating machinehttp://www.leadingcoating.com technology development? Along with the advance of social development and move forward, improve people's quality of life also in, the product requirements also rise accordingly, the coating industry in China is also fast development, the competition is becoming more and more large vacuum coating machine, of course, vacuum coating technology is not only a coating, with related industry is driven. At present although vacuum coating machine to form in the technology and equipped with a complete product system, but on the key technology is still unsatisfactory, is mainly include:
1. The coating industry requirements and technical talents shortage conflict
Talent is the first strategic materials, want to improve the breakthrough will have to do, in addition to need enough research and development funds guarantee, more important is the r&d staff with high quality, and can absorb the international advanced technology, a breakthrough innovation and improved the comprehensive performance of their products.
2. The primary products low conflict and the final product quality requirements
Coating is a kind of surface treatment technology, in the process of for the product must guarantee the adhesion layer, product index and the index has a difference in our country, in the process of coating processing, the processing technology, performance, efficiency, have higher requirements, but sometimes the difference between enterprise for its own products and market products advantage to change the original processing technology specification, so as to deepen the technology of vacuum coating machine.
3. Industry blockade, technology monopoly and open conflict
Industry development should be overall efforts, span large vacuum coating machine technology, comprehensive strength, the market space is big, the enterprise middle mutual blockade, monopoly of advanced technology, many enterprises in order to prevent technology leaks are behind closed doors, has the capability of independent innovation and research and development of manufacturers are numbered, high-quality professional talents to the whole industry vacancy.