The development prospects of vacuum plating

                       

  Vacuum coating machine is used for the vacuum plating equipment. Vacuum plating generally includes sputtering, evaporation, and three types of ion plating, specific practices are under the condition of vacuum, through use the way such as distillation or sputtering deposition film on the surface of plastic parts, this way can get very thin surface finishes, had many advantages, such as speed of generally used as a high-grade products can work sex coating. Traditional electroplating water, along with high pollution, high cost, has been gradually phased out by the market, and the emerging of vacuum plating technology, because all material is in a vacuum plating layer through the plasma deposition on the surface, there is no solution to pollution, zero pollution to the environment. Vacuum coating and vacuum plating density compared with the traditional water electroplating, corrosion resistant performance is greatly improved, deposition of coating thickness is far less than the conventional wet plating coating, the material is saved, at the same time reduces the cost; And traditional water electroplating incomparable is vacuum plating deposit material widely, can be deposited aluminum, titanium, zirconium and other traditional water can't deposit of low potential metal plating, if the reaction gas and alloy material was able to deposit from alloy to ceramic or even diamond coating, can also according to the need to design the coating system. The only fly in the ointment is vacuum plating coating adhesion far worse than water plating, and because of that, water plating has not completely disappeared, but believe in the near future, this defect will be revised, electroplating and vacuum plating will be replaced by water, so the prospects of the development of the vacuum plating will be very bright.